TCGE-0524-IR00
Drawing Hydraulic symbol
www.eltfluid.com
For general conditions and terms of use see page S.005.
This document is Elt Fluid property and therefore data or technical specification can
not be reproduced.
Eltfluid also reserves the right to modify all the above data, at any time.
0
5
10
15
20
0 102030405060708090
0
50
100
150
200
250
300
048121620
60
90
Flow control valves
Oil viscosity: 46 cSt (217 SSU) Fluid temperature: 40 °C
Pressure drop
4.11.001.1
TECHNICAL DATA
HYDRAULIC
Max. working pressure: 350 bar (5.075 psi)
Flow rate: 90 l/min (23,8 gpm)
Fluid:
Viscosity:
Mineral based oil
From 15cSt to 250 cSt
Flow Accuracy: 10%
Standard seals: O-ring NBR
Seal Polyurethane
Cavity: SCN1240
Installation torque: 60 Nm
Max contamination level: NAS 8 ISO 4406 19/17/14
Fluid temperature range: From -20 °C to +80 °C
Seals kit std.: 5AG0052
2
3
4
Description
3 ways spool type flow divider and combiner.
Operation mode
The flow divider cartridge will divert inlet flow from port 3 to ports
2 and 4, based on the indicated spool selection, regardless of
working pressure.
When the flow direction is reversed the valve will combine flows
from 2 and 4 to port 3. The flow is syncronized in both functions
dividing and combining modes in blocked conditions in motor
applications as well as at end stroke conditions in cylinder
applications.
GENERAL DATA
Weight: 0,16 Kg (0,35 lbs).
Ambient temperature range: -30 °C a 60 °C with standard seals (NBR).
Max. proof pressure: 420 bar (6.090 psi).
Flow Max: 90 l/min (23,8 gpm).
Cartridge materials: high strength steel, internal parts hardened and
grinding.
FD12C-33
Flow divider and combiner
TCGE-0524-IR00
Ordering code
Elt Fluid S.r.l.
Via Ganapini, 15/2
Loc. Felina 42035
Castelnovo ne’ Monti (RE) ITALY
mail: info@eltfluid.com
P.IVA/C.F 02573790355
Seals
Housing size ports
A- Aluminium
Material std. housing
S- Steel
None (std. NBR+Polyurethane)
Y- Polyurethane
Inches
Millimeters
Dimensions
For other options
contact Sales dept.
4B- 1/2” BSP
3B- 3/8” BSP
4S- SAE 10
3S- SAE 8
A- - -
Flow Division
50% - 50%
Flow Range
STANDARD HOUSING
Ordering code: See page 9.04.004
Material*: Aluminium/Steel
Max working pressure for aluminum body: 210 bar
Max working pressure for steel body: 350 bar
*Note: To correctly select the material, in relation to application, see page S.003.
l/min - gpm
60
15-60 l/min
(4-16 gpm)
90
23-90 l/min
(6-24 gpm)
4.11.001.2
FD12C-33
+H[
81)$
FD12C-33
